iphone 5s Blue Screen Restart Fix 100% Done

iphone 5s blueHi everyone!

In the spirit of sharing, I present you all the solution for the infamous blue screen/error 14 problem that usually appears after LCD changing or just disassembling the iPhone 5S.

Is NOT an easy fixing, so don’t even think to start if you are not an experienced technician!

As you can see in the first picture, mixing the screws will destroy some lines in the second layer of the board.

Start by removing the nut (if is not already snapped out) and CAREFULLY scratch out the first layer until you see the lines. Of course, you will need one good microscope, extremely sharp tools and steady hands. Again, is not an easy job!

Next step is to expose the lines and rebuild the broken ones. You can use a very thin wire (like the one from phone speaker/buzzer coil) or you can use some solder if the gap is not too big. One bad move and you will destroy more, so take care!

I had just one case with just one damaged line by the longer screw, most of the time I had to rebuild 3-5 lines out of the 7 there.

You can see in the pictures how is suppose to look a good board and 3 cases of affected lines . I did not have more time to trace down the lines, maybe I will find out an easy “surface jumper”, but whoever have a bare_board can try to trace that lines.

It took me some real time and countless beers, so feel free to give me one when you see me, especially if I saved your a s s… 

Of course, everything was, is and will be ©powered by oblio

 


Good board for reference:

3 different cases of broken lines:



iphone 5s blue screen solution
iphone 5s blue screen fix
iphone 5s blue screen restart solution
iphone 5s blue screen of death solution
iphone 5s blue screen restart fix
iphone 5s blue screen loop fix
iphone 5s blue screen reboot fix
iphone 5s blue screen reboot loop fix