- Make sure USB VCOM driver completely installed on your computer before continued to next step, Download and extract S920 to your computer, this contains also SP Flash Tool and ROM images folder (target_bin).
- Open SP Flash Tool folder and run Flash_Tool.exe, run it using administrator privilege when you using windows 7 or later. On SP Flash Tool open Options ↦ Option ↦ Download make sure DA DL All with Checksum is already checked, click X (Close) to apply the change and back to SP Flash Tool.
- Back to SP Flash Tool, now click Scatter-Loading and point it to target_bin/MT6589_Android_scatter_emmc.txt on locate on S920 extracted folder, this will automatically load all necessary files to SP Flash Tool.
- Change Download only option on SP Flash Tool to Firmware Upgrade mode, Finish configure all now press Download button or hit CTRL+D, wait SP Flash Tool to initialize and become to stand by mode.
- Turn off your device and remove the battery, wait 5 second then
connect your device to your computer. SP Flash Tool will begin recognize
your device and start the flashing process, this process mark by RED, PURPLE, and YELLOW bar on the bottom SP Flash Tool. When you see GREEN CIRCLE on the middle of SP Flash Tool, this mean flashing process already finish and you can disconnect your device.
- Done, you have successful upgrade your Lenovo S920 to Android KitKat, confirm it with go to System Setting ↦ About Phone look at Build Number make sure the version is same with the downloaded.
This guide is installing Android KitKat to Lenovo S920, I hope by
following this guide you will be able to solve your problems and please
leave any comments if you found any problems regarding this guide.Thank
You
No comments:
Post a Comment